What are the different types of gate valves?

Any plumbing system needs gate valves, which can be used in a variety of ways to regulate water flow. The various applications of gate valves will be covered in this article.

Ball valve gate valve butterfly valve gate valve globe valve stop valve check valve control valve


Gate Valves for Oil and Gas

Oil and gas pipelines are incomplete without gate valves. They maintain the system's pressure while allowing fluid to flow through the pipeline. Gate valves are divided into three main categories: spring, a butterfly, and a disc.

Additionally, other valves such the KEBV knife gate valveKEBV slide gate valveKEBV sluice valve and others, will likely meet your requirements and possibly go over, just browse through it and have a look.

Gate Valves for Water

There are numerous varieties of gate valves, each with a distinct purpose in mind. The most typical types are listed below:


1.Valve Balls: The flow of water is typically controlled by these valves in water lines. When pressure is applied to the ball, they use a ball to keep the valve closed and open when pressure is released.

2.Valve Butterfly: Unlike ball valves, these valves have two wings that open and close independently. They are able to control the flow of water simultaneously in two directions as a result of this.

3.Verify Valves: The water flow is measured by these valves in water lines. They have a small opening on one side that lets water through but prevents other objects from doing so. The hole completely opens up when the valve is opened, allowing water to freely enter and exit the line. The smaller hole when it is closed prevents too much water from passing through at once.

This contains: Ball Valve


Gate Valves for Biological Processes

In a variety of biological processes, gate valves are utilized to regulate the flow of gases, particles, and liquids. In bioreactors and other processing equipment, they are typically used to control the flow of materials and prevent cross contamination. There are many different kinds of gate valves, which can be categorized according to the gate they use, the fluid they control, or how they work.

Gate Valves for Air and Gas

A plumbing system's gate valves are an essential component. They permit the flow of various gases and air through the system. The type of gas or air that can pass through a gate valve such as slurry knife gate valve  can separate them into different categories.

Ventilation and cooling systems are both controlled by air gate valves. The difference in pressure between the inside and outside environment determines when these valves open and close.

In pipelines, gas flow is controlled by gas gate valves. When a gas with a higher pressure flows through them, these valves open and close..